10.5 kW Solar Kit LG 330 AC Enphase Micro

• PARTS LIST
• (32) LG 330 watt AC Micro module
• (32) Factory-installed Enphase Energy micro-inverters model IQ6+
• IQ Envoy 24/7 panel monitoring
• IQ Combiner box
• Safety switch AC disconnect box
• Micro mounts, IQ cables, wire clips, termination caps
• Rooftop racks, portrait layout, flush setup
• Roof Mounts, choose shingle flash-foot, tile hook, or metal roof bracket
• Mounting rails, splices and grounding lugs (IronRidge or UniRac)
• Module bonding clamps, black finish
• Micro-inverter bonded mounting hardware
• NEC code compliant site map placard and safety labels
• WARRANTY AND SUPPORT
• 12 year product, 25 year performance warranty on LG solar panels
• 25 year manufacturers performance warranty on micro-inverters
• 20 year product warranty on mounting
• Lifetime 24/7 system monitoring for each panel
• Lifetime technical support from FreeCleanSolar and Manufacturers
• PV system permit plans with site map, engineering drawings, and electrical diagram
• Product data sheets and warranty certificates from manufacturers
• Installation instruction manuals
• PV ARRAY SYSTEM SPECIFICATIONS
• Maximum Power DC (Wp): 10,560 watts DC; 10.5 kW
• Maximum Power AC (Wp): 9,280 watts AC
• Estimated Power Generated: 1,320 kWh AC monthly average
• Rated AC Power Voltage Vmp (V): 240V
• Maximum System Output Current Imp (A): 37 Amps
• Minimum Required OCPD Circuit Breaker Rating (A): 47 Amps
• Array Dimensions: 577 square feet
• Array Weight: 1,472 lbs
• Distributed Load: 2.7 lbs psf
• Structural Design Criteria: ASCE 7-10
• Design Wind Speed Rating: 110 mph
• Design Snow Load: 20 lbs psf
• Design Anchor Spacing: 6' span
• SOLAR PANEL SPECIFICATIONS
• Manufacturer: LG Solar
• Model: LG330E1C-A5 NeON2 ACe
• DC OPERATING CHARACTERISTICS
• STC DC Watts Maximum Power Pmax: 330 W
• PTC DC Watts Maximum Power Pmax: 306.3 W
• NOCT DC Watts Nominal Power Pnom: 243.0 W
• Module Efficiency: 19.3%
• Power Tolerance (%): 0 + 3%
• Max Power Voltage (Vmp): 34.1 Volts
• Max Power Current (Impp): 9.83 Amps
• Open Circuit Voltage (Voc): 41.0 Volts
• Short Circuit Current (Isc): 10.49 Amps
• AC ELECTRICAL PROPERTIES
• Inverter Model: Enphase IQ6+ Microinverter
• Peak Output Power (VA): 290 watts
• Max. Continuous Output Power (VA): 28-0 watts
• Nominal Voltage: 240Vac
• Voltage Range: 211 ~ 264 Vac
• Nominal Output Current (A): 1.17 Amps
• Nominal Frequency / Range (Hz): 60 Hz; 59.3 ~ 60.5 Hz
• Power Factor / Adjustable: 1; 0.7 leading... 0.7 lagging
• CEC Weighted Ef ciency (%): 97.0%
• Max. Branch Circuit Over Current Protection: 20 amps
• Number of Max. AC Modules per branch circuit: 13
• MECHANICAL PROPERTIES
• Cell Technology Type: Monocrystalline, N-type
• Solar Cells: 60
• Frame: Anodized Aluminum Alloy, Black
• Connector type: MC4 IP67
• Dimensions: 64.56 x 39.37 x 1.57 inches
• Weight: 41.88 lbs
• CERTIFICATIONS AND WARRANTY
• Snow load: 6000 Pa / 125 psf
• Wind Load: 5400 Pa / 112 psf
• Operating temperature: -40F to +195F
• Module Fire Performance: Type 1
• Fire Safety Classification: Class C
• Certifications: California CEC, IEC 61215, IEC 61730, IEC 62716 (Ammonia Test), IEC 61701(Salt Mist Corrosion Test)
• Product Warranty: 12 years material and workmanship
• Performance Guarantee: 25 years linear power output; 1st year: 98%, after 2nd year: 0.55%p annual degradation, total 84.8% for 25 years

DIY or Full-Service Pro Solar Installation

You can choose how to install the solar panel system. You can Do-It-Yourself (DIY), hire any contractor or handyman for labor, or we can provide Full-Service Professional installation. Most customers choose DIY to save some serious money. However you decide to go solar, we will provide the permit plans, instruction manuals and lifetime technical support. You will also have the same manufacturer warranties, and be eligible for tax credits, rebates and other incentives.

Full-Service, Professional solar panel system installation by a state licensed contractor includes labor, wiring, electrical setup, balance of system parts, building permit, utility approval, inspection, monitoring setup, and activation. 5 year warranty on labor. Installation services are not subject to state sales tax. Final price subject to system design and site visit. Additional fees may apply for electrical panel upgrade, multiple roof areas, conduit wiring greater than 100 ft, two or more story property, or tilt mounting.

How to Install the PV Solar Electric Kit

1. Read and follow the installation instruction manuals provided with the solar panel, micro-inverter, and mounting
2. Secure the roof attachments or flashing to the roof joists; add caulk as needed
3. Attach mounting rails to the roof attachments using supplied hardware
4. Secure the micro-inverter(s) to the mounting rails using the supplied hardware
5. Connect the AC inverter cables along each row of modules.
6. Connect the AC inverter cable to a junction box or AC Safety Switch disconnect box (optional, varies by location). Throw the AC safety switch to the OFF position.
7. Connect PV wires from the junction box or safety switch to an open circuit breaker in the household electrical box. Throw the solar circuit breaker to the OFF position.
8. Connect the solar panel output cables to the micro-inverter input cables
9. Secure the solar panels to the mounting rails using the supplied mid-clamps and end-clamps
10. Contact the local building department and / or electric utility company to schedule inspection prior to system activation and connection to the grid

Tools Required to Install Rooftop Solar Mounting

• Tape measure
• Roofers bar, shingle ripper
• Chalk line
• Stud finder
• Caulking gun
• Sealant compatible with roofing materials
• Drill with 7/32" long-style bit
• Drill or impact gun with 1/2" deep socket
• Ladder, safety harness and rope

How to Install PV Solar Panel Roof Flashing Attachment

Simply slide the flashing under a row of roof shingles, drill pilot hole, apply sealant to hole, secure with bolt and attach sealing washer. Just a few minutes to install flash-foot. Watch this video for a demonstration.

Fast, Simple Universal Fastening Objects (UFO)

Comparing IronRidge XR rails to Box rails

Pro Tips to Mount Solar Rails Square on a Rooftop

Time-Lapse Installation Video for Rooftop Solar Mounting

How The Enphase Home Energy System Works

Video Installation Instructions for the Enphase Micro-Inverter

Installation Instructions for the Enphase Envoy with Wi-Fi Adapter