10kW PV Kit SolarWorld SW345 XL SMA Sunny Boy

• PARTS LIST
• (30) SolarWorld SunModule Pro 345 watt model SW345 XL Mono
• (2) SMA 5,000 watt AC inverter, Sunny Boy SB5.0 with day-time emergency power supply
• Inverter integrated safety switch disconnect box
• (3) x 100' PV wires with MC4 connectors
• Rooftop rack system, 3 row X 10 column layout, portrait orientation, flush setup
• Mounting rails, splices and grounding lugs
• Module grounding mid-clamps and end-clamps
• L-feet attachments with hardware
• QuickMount PV water-tight aluminum flashing or Schletter tile roof hooks
• NEC code compliant PV labels and placard
• WARRANTY AND SUPPORT
• 10 year product, 25 year performance warranty on solar panels
• 10 year product warranty on inverter; optional extended warranty up to 20 years
• 20 year product warranty on mounting
• Lifetime 24/7 system monitoring
• Lifetime technical support from FreeCleanSolar and Manufacturers
• PV system permit plans with site map, engineering drawings, and electrical diagram
• Product data sheets and warranty certificates from manufacturers
• Installation instruction manuals
• PV ARRAY SYSTEM SPECIFICATIONS
• Maximum Power DC (Wp): 10,350 watts DC; 10.3 kW
• Maximum Power AC (Wp): 9,079 watts AC
• Estimated Power Generated: 1,200 kWh AC monthly average
• Rated AC Power Voltage Vmp (V): 240V
• Maximum System Output Current Imp (A): 42A
• Minimum Required OCPD Circuit Breaker Rating (A): 60 Amps
• Array Dimensions: 630 square feet
• Array Weight: 1,700 lbs
• Distributed Load: 2.7 lbs psf
• Structural Design Criteria: ASCE 7-10
• Design Wind Speed Rating: 110 mph
• Design Snow Load: 20 lbs psf
• SOLAR PANEL SPECIFICATIONS
• STC DC Watts Maximum Power Pmax: 345 W
• PTC DC Watts Maximum Power Pmax: 313.6 W
• NOCT DC Watts Nominal Power: 263.8 W
• Module Efficiency: 17.29%
• Maximum Power Voltage Vmp (V): 38.2V
• Maximum Power Current Imp (A): 9.10A
• Open Circuit Voltage Voc (V): 47.8V
• Short Circuit Current Isc (A): 9.75A
• Maximum system voltage: 1000V UL, 1000V IEC
• Maximum reverse current series fuse rating: 25A
• Power Tolerance 0 +5W
• Cells per module: 72
• Cell Technology Type: Monocrystalline
• Frame: Anodized Aluminum Alloy, Silver
• Dimensions: 78.46 x 39.4 x 1.30 inches (33mm frame)
• Weight: 47.6 lbs
• Junction Box: IP65 Class
• Connector Type: PV wire per UL4703 with H4 connectors
• Output cables: 39 inches
• Product Warranty: 10 years material and workmanship
• Performance Guarantee: 25 years power output
• Module fire performance: UL 1703 Type 1
• Fire Safety Classification: Class C
• Certifications: UL 1703, California CEC, IEC 61215, IEC/EN 61730
• Operating Temperature Range: -40F to +185F
• Nominal Operating Cell Temperature NOCT: 113 degrees F +/- 2 degrees
• Front Load (snow) Test: 113 PSF
• Rear static load (wind) test: 5400Pa
• Design Loads - Two rail system: 113 psf downward, 64 psf upward
• Design Loads - Edge mounting: 178 psf downward, 23 psf upward
• Hailstone impact test: 1 inch hail at 51 mph from 1m distance

DIY or Full-Service Pro Solar Installation

You can choose how to install the solar panel system. You can Do-It-Yourself (DIY), hire any contractor or handyman for labor, or we can provide Full-Service Professional installation. Most customers choose DIY to save some serious money. However you decide to go solar, we will provide the permit plans, instruction manuals and lifetime technical support. You will also have the same manufacturer warranties, and be eligible for tax credits, rebates and other incentives.

Professional solar panel system installation by a state licensed contractor includes labor, wiring, electrical setup, balance of system parts, building permit, utility approval, inspection, monitoring setup, and activation. 5 to 10 year warranty on labor. Installation services are not subject to state sales tax. Final price subject to system design and site visit. Additional fees may apply for electrical panel upgrade, multiple roof areas, conduit wiring greater than 100 ft, two or more story property, or tilt mounting.

How to Install the Solar Panel Kit with String Inverter

1. Read and follow the installation instruction manuals provided with the solar panels, inverter and mounting system
2. Secure the roof attachment standoffs and flashing to the roof joists; add caulk as needed
3. Attach mounting rails to the roof attachment standoffs using supplied hardware
4. Secure the solar panel(s) to the mounting rails using the supplied mid-clamps and end-clamps
5. Connect the solar panel cables
6. Connect the last PV cable to a junction box or DC Safety Switch disconnect box (optional, varies by location)
7. Connect PV wires from the junction box or safety switch to the inverter
8. Connect the inverter to an new circuit breaker in the household electrical box
9. Contact the local building department or electric utility company to schedule inspection and connection to the grid for permission to operate

Tools Required to Install Rooftop Solar Mounting

• Tape measure
• Roofers bar, shingle ripper
• Chalk line
• Stud finder
• Caulking gun
• Sealant compatible with roofing materials
• Drill with 7/32" long-style bit
• Drill or impact gun with 1/2" deep socket
• Ladder, Safety harness and rope

How to Install QuickMount PV Solar Panel Flashing Attachment

Simply slide the flashing under a row of roof shingles, drill pilot hole, apply sealant to hole, secure with bolt and attach sealing washer. Just a few minutes to install QuickMount PV. Watch this video for a demonstration.

Video Installation Guide for Rooftop Solar Mounting

The SMA Sunny Boy-US Inverter

How to Install the SMA SB-6.0 Inverter

SMA Sunny Boy Secure Power Supply

The Secure Power Supply on the Sunny Boy inverter is a battery-less generator that can provide 2,000 watts of power during daytime grid outages. Installing the Sunny Boy secure power supply feature can be done in a few minutes.

How to Commission the SMA Sunny Boy Inverter