10kW Solar Kit BenQ 265W panels SMA inverters

• Your pre-engineered 10,600 watt DC Grid-Tie System from BenQ will include:
• 40 BenQ Green triplex Solar Panel model # PM250M01-265 watt
• 2 SMA Sunny Boy inverter model # SB-4000TL-US
• PV cables for module connection, extension and transition
• Cable management clips
• Termination cap(s)
• Unirac rooftop rack system, 4 row X 10 column layout, portrait orientation, flush mount setup
• Unirac SolarMount rails
• Module mid-clamps and end-clamps
• L-feet attachments with hardware
• QuickMount PV water-tight aluminum flashing with hardware
• WEEB grounding lugs and clips
• Integrated safety switch disconnect box
• Code compliant PV warning labels
• Documentation includes product data sheets, warranty certificates, installation instructions with wiring diagrams, and owner manuals
• 25 year manufacturers performance warranty on solar panels
• 10 year product warranty on inverter
• The solar kits does NOT include copper grounding wire or PV wire from the solar array to the main household electrical panel
• PV Array Specifications:
• Maximum Power DC (Wp): 10,600 watts DC; 10.6 kW
• Maximum Power AC (Wp): 8,480 watts AC
• Estimated Power Generated: 1,350 kWh AC monthly average
• Maximum Power Voltage Vmp (V): 240V
• Open Circuit Voltage Voc (V) Range: 211 - 264V
• Maximum System Output Current Imp (A): 40A
• Array Dimensions: 700 square feet
• Array Weight: 1,750 lbs
• Solar Panel Specifications: BenQ Solar Module PM250M01-265
• STC Maximum Power Pmax (Wp): 265 watts DC
• PTC Maximum Power Pmax (Wp): 238.5 watts DC
• Module Efficiency: 16.4%
• Maximum Power Voltage Vmp (V): 31.3V
• Maximum Power Current Imp (A): 8.47A
• Open Circuit Voltage Voc (V): 38.2V
• Short Circuit Current Isc (A): 8.98A
• Maximum system voltage (UL): 600V UL, 1000V IEC
• Maximum series fuse rating: 15A
• Cells per module: 60
• Cell Type: Monocrystalline silicon
• Frame: Anodized Aluminum Alloy - Black
• Glass: High transparent tempered solar glass
• Dimensions: 65 x 39 x 1.57 inches
• Weight: 40.79 lbs
• Connector Type: Tyco MC4 compatible
• Output cables: 39.37 inches
• Product Warranty: 10 years material and workmanship
• Performance Guarantee: 25 years power output
• Fire Safety Classification: Class C
• Certifications: UL 1703, CEC, IEC 61215, IEC/EN 61730
• Operating Temperature Range: -40F to +185F
• Nominal Operating Cell Temperature NOCT: 110.1 degrees F +/- 2 degrees
• Front Load (snow) Test: 112.8 PSF
• Rear static load (wind) test: 5400Pa
• Hailstone impact test: 1 inch hail at 23M/s from 1m distance

How to Install the BenQ Solar Array

1. Read and follow the installation instruction manuals provided with the solar panels, inverter and mounting system
2. Secure the roof attachment standoffs and flashing to the roof joists; add caulk as needed
3. Attach mounting rails to the roof attachment standoffs using supplied hardware
4. Secure the solar panel(s) to the mounting rails using the supplied mid-clamps and end-clamps
5. Connect the solar panel cables
6. Connect the last PV cable to a junction box or DC Safety Switch disconnect box (optional, varies by location)
7. Connect a PV wire from the junction box or safety switch to the SMA Sunny Boy inverter
8. Connect the SMA Sunny Boy inverter to an open 20A circuit breaker in the household electrical box
9. Contact the local electric utility company to schedule connection to the grid

How to Install the SMA SB-TL-US Inverter