10kW Solar Kit Canadian CS5P SMA SB9000 inverter

• Your pre-engineered 10,200 watt DC Grid-Tie System from Canadian will include:
• 40 Canadian Solar Panels 255 watt model # CS5P-255M
• 1 SMA Sunny Boy inverter model # SB-9000TL-US-12
• PV cables for module connection, extension and transition
• Cable management clips
• Termination cap(s)
• Rooftop rack system, 4 row X 10 column layout, portrait orientation, flush mount setup
• Mounting rails
• Module mid-clamps and end-clamps
• L-feet attachments with hardware
• QuickMount PV water-tight aluminum flashing with hardware
• WEEB grounding lugs and clips
• Integrated safety switch disconnect box
• Documentation includes product data sheets, warranty certificates, installation instructions with wiring diagrams, and owner manuals
• 25 year manufacturers performance warranty on solar panels
• 10 year product warranty on inverter
• The solar kits does NOT include copper grounding wire or PV wire from the solar array to the main household electrical panel
• System Specifications:
• Maximum Power DC (Wp): 10,200 watts DC; 10.2 kW
• Maximum Power AC (Wp): 8,200 watts AC
• Estimated Power Generated: 1,300 kWh AC monthly average
• Maximum Power Voltage Vmp (V): 240V
• Open Circuit Voltage Voc (V) Range: 211 - 264V
• Maximum System Output Current Imp (A): 44A
• Array Dimensions: 700 square feet
• Array Weight: 1,800 lbs
• Solar Panel Specifications: Canadian Solar Module CS5P-255M
• STC Maximum Power Pmax (Wp): 255 watts DC
• PTC Maximum Power Pmax (Wp): 231.9 watts DC
• AC kWh generated based on NREL PV Watts estimate
• Module Efficiency: 15.00%
• Maximum Power Voltage Vmp (V): 49.0V
• Maximum Power Current Imp (A): 5.21A
• Open Circuit Voltage Voc (V): 59.8V
• Short Circuit Current Isc (A): 5.55A
• Maximum system voltage: 600V UL, 1000V IEC
• Maximum series fuse rating: 10A
• Power Tolerance 0 + 5W
• Solar Cells per module: 96
• Solar Cell Type: Mono-crystalline silicon
• Frame: Anodized Aluminum Alloy, silver
• Glass: 3.2mm high transparent tempered solar glass, self-cleaning
• Dimensions: 63.1 x 41.8 x 1.57 inches
• Weight: 44.8 lbs
• Junction Box: IP65, IP67 Class, 4 diodes
• Connector Type: MC4 or compatible
• Output cables: 39.4 inches, 12 AWG
• Product Warranty: 10 years material and workmanship
• Performance Guarantee: 25 years power output
• Fire Safety Classification: Class C
• Certifications: UL 1703, California CEC, IEC 61215, IEC/EN 61730, IEC 61701 Salt Mist Corrosion Testing, IEC 62716
• Operating Temperature Range: -40F to 185F
• Nominal Operating Cell Temperature NOCT: 113 degrees F +/- 2 degrees
• Front Load (snow) Test: 113 PSF
• Rear static load (wind) test: 5400Pa
• Hailstone impact test: 1 inch hail at 52 mph from 3ft distance

How to Install the Canadian Solar Panel System

1. Read and follow the installation instruction manuals provided with the solar panel and micro-inverter
2. Secure the roof attachment standoffs and flashing to the roof joists; add caulk as needed
3. Attach mounting rails to the roof attachment standoffs using supplied hardware
4. Secure the solar panel(s) to the mounting rails using the supplied mid-clamps and end-clamps
5. Connect the solar panel cables
6. Connect the last PV cable to a junction box or DC Safety Switch disconnect box (optional, varies by location)
7. Connect a PV wire from the junction box or safety switch to the SMA Sunny Boy inverter
8. Connect the SMA Sunny Boy inverter to an open 20A circuit breaker in the household electrical box
9. Contact the local electric utility company to schedule connection to the grid