10kW Solar Kit Suniva OPT275 Enphase Micro

• Your Grid-Tie Solar System will include:
• (38) Suniva 275 watt Optimus Module OPT275
• (38) Enphase M250 micro-inverters
• Enphase Envoy Enlighten lifetime performance monitoring system
• AC disconnect safety switch
• Micro-inverter mounts, termination caps, Engage cables and wire management clips
• Rooftop rack system, 3 row X 13 column layout, portrait orientation, flush setup
• Mounting rails and splices
• Module grounding mid-clamps and end-clamps
• L-feet attachments with hardware
• QuickMount PV water-tight aluminum flashing or Schletter tile roof hooks
• NEC code compliant PV labels
• PV system permit plans, product data sheets, warranty certificates and installation instruction manuals
• 25 year manufacturers performance warranty on solar panels
• 25 year manufacturers performance warranty on micro inverters
• PV SYSTEM ARRAY SPECIFICATIONS
• Maximum Power DC (Wp): 10,450 watts DC; 10.4 kW
• Maximum Power AC (Wp): 9,012 watts AC
• Estimated Power Generated: 1,250 kWh AC monthly average
• Maximum Power Voltage Vmp (V): 240V
• System Output Current Imp (A): 38A
• Array Dimensions: 700 square feet
• Array Weight: 1,900 lbs
• Distributed Load: 2.7 lbs psf
• Structural Design Criteria: ASCE 7-10
• Wind Speed Rating: 110 mph
• Snow Load: 20 lbs psf
• SOLAR PANEL SPECIFICATIONS:
• Manufacturer: Suniva
• Solar Panel Model: Optimus OPT275-60-4-100
• Maximum Power Pmax STC (Wp): 275 watts DC
• Maximum Power Pmax PTC (Wp): 244.5 watts DC
• Nominal Power NOCT: n/a
• Module Efficiency: 16.73%
• Maximum Power Voltage Vmp (V): 31.70V
• Maximum Power Current Imp (A): 8.68A
• Open Circuit Voltage Voc (V): 38.70V
• Short Circuit Current Isc (A): 9.43A
• Maximum system voltage: 1000V UL, 1000V IEC
• Maximum series fuse rating: 15A
• Power Tolerance 0 +/- 3%
• Solar Cells per module: 60
• Solar Cell Type: Mono-crystalline silicon
• Frame: Anodized Aluminum Alloy, silver frame
• Glass: Anti-reflective coating, tempered, low-iron solar glass
• Dimensions: 65.35 x 38.98 x 1.37 inches
• Weight: 39.5 lbs
• Junction Box: NEMA IP67 rated; 3 internal bypass diodes
• Connector Type: MC4, H4, Tyco
• Output cables: 36.4 inches, 12 AWG
• Product Warranty: 10 years material and workmanship
• Performance Guarantee: 25 years power output
• Fire Safety Classification: Class C
• Certifications: UL 1703, California CEC, IEC 61215, IEC 61730
• Operating Temperature Range: -40F to 185F
• Nominal Operating Cell Temperature NOCT: 113 degrees F +/- 2 degrees
• Front Load (snow) Test: 113 PSF
• Rear static load (wind) test: 5400Pa
• Hailstone impact test: 1 inch hail at 23M/s from 1m distance

DIY or Full-Service Pro Solar Installation

You can choose how to install the solar panel system. You can Do-It-Yourself (DIY), hire any contractor or handyman for labor, or we can provide Full-Service Professional installation. Most customers choose DIY to save some serious money. However you decide to go solar, we will provide the permit plans, instruction manuals and lifetime technical support. You will also have the same manufacturer warranties, and be eligible for tax credits, rebates and other incentives.

Full-Service, Professional solar panel system installation by a state licensed contractor includes labor, wiring, electrical setup, balance of system parts, building permit, utility approval, inspection, monitoring setup, and activation. 5 year warranty on labor. Installation services are not subject to state sales tax. Final price subject to system design and site visit. Additional fees may apply for electrical panel upgrade, multiple roof areas, conduit wiring greater than 100 ft, two or more story property, or tilt mounting.

How to Install the PV Solar Electric Kit

1. Read and follow the installation instruction manuals provided with the solar panel, micro-inverter, and mounting
2. Secure the roof attachments or flashing to the roof joists; add caulk as needed
3. Attach mounting rails to the roof attachments using supplied hardware
4. Secure the micro-inverter(s) to the mounting rails using the supplied hardware
5. Connect the AC inverter cables along each row of modules.
6. Connect the AC inverter cable to a junction box or AC Safety Switch disconnect box (optional, varies by location). Throw the AC safety switch to the OFF position.
7. Connect PV wires from the junction box or safety switch to an open circuit breaker in the household electrical box. Throw the solar circuit breaker to the OFF position.
8. Connect the solar panel output cables to the micro-inverter input cables
9. Secure the solar panels to the mounting rails using the supplied mid-clamps and end-clamps
10. Contact the local building department and / or electric utility company to schedule inspection prior to system activation and connection to the grid

Tools Required to Install Rooftop Solar Mounting

• Tape measure
• Roofers bar, shingle ripper
• Chalk line
• Stud finder
• Caulking gun
• Sealant compatible with roofing materials
• Drill with 7/32" long-style bit
• Drill or impact gun with 1/2" deep socket
• Ladder, safety harness and rope

How to Install Solar Panel QuickMount Flashing Attachments

Simply slide the flashing under a row of roof shingles, drill pilot hole, apply sealant to hole, secure with bolt and attach sealing washer. Just a few minutes to install QuickMount PV. Watch this video for a demonstration.

Video Installation Guide for Solar Mounting

Video Installation Instructions for the Enphase M250 Micro-Inverter