10kW Solar Kit Trina 260W Enphase microinverter

• Your 10,400 watt DC Grid-Tie System will include:
• 40 Trina Solar 260 watt TSM-260
• 40 Enphase M250 Micro inverters
• Enphase Envoy Enlighten lifetime performance monitoring package
• AC Safety switch combining disconnect box, MidNite Solar MNPV6
• Micro-inverter cables, termination caps and wire management clips
• Unirac rooftop SolarMount system, 4 row X 10 column layout, portrait orientation, flush setup
• Unirac SolarMount rails
• Module mid-clamps and end-clamps
• L-feet attachments with hardware
• QuickMount PV water-tight aluminum flashing with hardware
• Grounding WEEB lugs and clips
• 100ft copper PV wire to connect to the main household electrical panel
• NEC code compliant PV labels
• Documentation includes permit-ready PV system design specifications, wiring diagram, installation instructions and warranty certificates
• 25 year manufacturers performance warranty on solar panels
• 25 year inverter warranty
• PV Array System Specifications:
• Maximum Power DC (Wp): 10,400 watts DC; 10.4 kW
• Maximum Power AC (Wp): 9,600 watts AC
• Estimated Power Generated: 1,400 kWh AC monthly
• Maximum Power Voltage Vmp (V): 240V
• Open Circuit Voltage Voc (V) Range: 211 - 264V
• System Output Current Imp (A): 40.0A
• Output Current Imp per module (A): 1.0A
• Array Dimensions: 700 square feet
• Array Weight: 2,000 lbs
• Solar Module Specifications: Trina Solar TSM-260PD05.08
• STC DC Watts Maximum Power Pmax: 260 W
• PTC DC Watts Maximum Power Pmax: 236.9 W
• Module Efficiency: 15.90%
• Maximum Power Voltage Vmp: 30.6V
• Maximum Power Current Imp: 8.50A
• Open Circuit Voltage Voc: 38.2V
• Short Circuit Current Isc: 9.00A
• Maximum DC system voltage (UL): 600V UL; 1000V IEC
• Maximum series fuse rating: 15A
• Cells per module: 60
• Cell Type: Polycrystalline silicon
• Frame: Anodized Aluminum Alloy, Black
• Glass: High transparency Low iron tempered solar glass
• Dimensions: 64.95 x 39 x 1.57 inches
• Weight: 43 lbs
• Connector Type: MC4
• Output cables: 39.4 inches
• Product Warranty: 10 years material and workmanship
• Performance Guarantee: 25 years power output
• Fire Safety Classification: Class C
• Certifications: UL 1703, cUL, California CEC
• Operating Temperature Range: -40F to +185F
• Front Load (snow) Test: 5400 Pa
• Rear static load (wind) test: 2400Pa
• Hailstone impact test: 1 inch hail at 23M/s from 1m distance

DIY or Full-Service Pro Solar Installation

You can choose how to install the solar panel system. You can Do-It-Yourself (DIY), hire any contractor or handyman for labor, or we can provide Full-Service Professional installation. Most customers choose DIY to save some serious money. However you decide to go solar, we will provide the permit plans, instruction manuals and lifetime technical support. You will also have the same manufacturer warranties, and be eligible for tax credits, rebates and other incentives.

Full-Service, Professional solar panel system installation by a state licensed contractor includes labor, wiring, electrical setup, balance of system parts, building permit, utility approval, inspection, monitoring setup, and activation. 5 year warranty on labor. Installation services are not subject to state sales tax. Final price subject to system design and site visit. Additional fees may apply for electrical panel upgrade, multiple roof areas, conduit wiring greater than 100 ft, two or more story property, or tilt mounting.

How to Install the PV Solar Electric Kit

1. Read and follow the installation instruction manuals provided with the solar panel, micro-inverter, and mounting
2. Secure the roof attachments or flashing to the roof joists; add caulk as needed
3. Attach mounting rails to the roof attachments using supplied hardware
4. Secure the micro-inverter(s) to the mounting rails using the supplied hardware
5. Connect the AC inverter cables along each row of modules.
6. Connect the AC inverter cable to a junction box or AC Safety Switch disconnect box (optional, varies by location). Throw the AC safety switch to the OFF position.
7. Connect PV wires from the junction box or safety switch to an open circuit breaker in the household electrical box. Throw the solar circuit breaker to the OFF position.
8. Connect the solar panel output cables to the micro-inverter input cables
9. Secure the solar panels to the mounting rails using the supplied mid-clamps and end-clamps
10. Contact the local building department and / or electric utility company to schedule inspection prior to system activation and connection to the grid

Tools Required to Install Rooftop Solar Mounting

• Tape measure
• Roofers bar, shingle ripper
• Chalk line
• Stud finder
• Caulking gun
• Sealant compatible with roofing materials
• Drill with 7/32" long-style bit
• Drill or impact gun with 1/2" deep socket
• Ladder, safety harness and rope

How to Install Solar Panel QuickMount Flashing Attachments

Simply slide the flashing under a row of roof shingles, drill pilot hole, apply sealant to hole, secure with bolt and attach sealing washer. Just a few minutes to install QuickMount PV. Watch this video for a demonstration.

Video Installation Guide for Solar Mounting

Video Installation Instructions for the Enphase M250 Micro-Inverter