11.4kW Solar Kit Conergy 260W panels, ABB Inverter, Mounting

• Your 11,440 watt DC Grid-Tie System from Conergy will include:
• 44 Conergy Solar Panel 260 watt model # PE-260P
• 2 ABB Power-One inverter model # PVI-5000-OUTD-US-A
• Rooftop rack system, 4 row X 11 column layout, portrait orientation, flush mount setup
• Mounting rails and splices
• Module mid-clamps and end-clamps
• L-feet attachments with hardware
• QuickMount PV water-tight aluminum flashing with hardware
• WEEB grounding lugs and clips
• Inverter integrated safety switch disconnect box
• NEC code compliant PV labels
• Documentation includes permit-ready PV system design specifications, installation instructions and warranty certificates
• 25 year manufacturers performance warranty on solar panels
• 10 year product warranty on inverter
• The solar kit does NOT include copper grounding wire or PV wire from the solar array to the main household electrical panel
• System Specifications:
• Maximum Power DC (Wp): 11,440 watts DC; 11.4 kW
• Maximum Power AC (Wp): 9,724 watts AC
• Estimated Power Generated: 1,480 kWh AC monthly average
• Maximum Power Voltage Vmp (V): 240V
• Open Circuit Voltage Voc (V) Range: 211 - 264V
• Maximum System Output Current Imp (A): 46A
• Array Dimensions: 800 square feet
• Array Weight: 2,100 lbs
• Solar Panel Model Specification: Conergy PE-260P
• STC Maximum Power Pmax (Wp): 260 watts DC
• PTC Maximum Power Pmax (Wp): 232.1 watts DC
• Module Efficiency: 15.90%
• Maximum Power Voltage Vmp (V): 30.77V
• Maximum Power Current Imp (A): 8.45A
• Open Circuit Voltage Voc (V): 37.73V
• Short Circuit Current Isc (A): 8.91A
• Maximum system voltage (UL): 1000V UL, 1000V IEC
• Maximum series fuse rating: 15A
• Cells per module: 60
• Cell Type: Polycrystalline silicon, 3 busbar
• Frame: Anodized Aluminum Alloy, clear
• Glass: 3.2mm tempered solar glass, self-cleaning
• Dimensions: 65 x 39.1 x 1.57 inches
• Weight: 40.7 lbs
• Junction Box: IP67, Tongling TL-Box026
• Connector Type: MC4 compatible Tongling TL cable
• Output cables: 39.4 inches, 12 AWG
• Product Warranty: 10 years material and workmanship
• Performance Guarantee: 25 years power output
• Fire Safety Classification: Class C
• Certifications: UL 1703, CEC, IEC 61215, IEC/EN 61730, IEC 61701 Salt Mist Corrosion Testing
• Operating Temperature Range: -40F to 136F
• Nominal Operating Cell Temperature NOCT: 110.1 degrees F +/- 2 degrees
• Front Load (snow) Test: 113 PSF
• Rear static load (wind) test: 5400Pa
• Hailstone impact test: 1 inch hail at 52 mph from 3 ft distance

How to Install the Conergy Solar Panel System

1. Read and follow the installation instruction manuals provided with the solar panels, inverter and mounting system
2. Secure the roof attachment standoffs and flashing to the roof joists; add caulk as needed
3. Attach mounting rails to the roof attachment standoffs using supplied hardware
4. Secure the solar panel(s) to the mounting rails using the supplied mid-clamps and end-clamps
5. Connect the solar panel cables
6. Connect the last PV cable to a junction box or DC Safety Switch disconnect box (optional, varies by location)
7. Connect a PV wire from the junction box or safety switch to the SMA Sunny Boy inverter
8. Connect the SMA Sunny Boy inverter to an open 20A circuit breaker in the household electrical box
9. Contact the local electric utility company to schedule connection to the grid