12.5kW Solar Kit Conergy 260W, Enphase Micro-Inverter, Rooftop

• Your 12,480 watt DC Grid-Tie System from Conergy will include:
• 48 Conergy Solar Panel 260 watt model # PE-260P
• 48 Enphase M215 Micro-Inverter M215-60-2LL-S22-IG with integrated grounding feature
• Enphase Engage inverter trunk connector cables and accessories
• Enphase Envoy Communications Gateway and Enlighten monitoring
• Safety switch AC disconnect box
• Rooftop rack system, 4 row X 12 column layout, portrait orientation, flush mount setup
• Mounting rails and splices
• Module mid-clamps and end-clamps
• L-feet attachments with hardware
• QuickMount PV water-tight aluminum flashing with hardware
• WEEB grounding lugs and clips
• NEC code compliant PV labels
• Documentation includes permit-ready PV system design specifications, wiring diagram, installation instructions and warranty certificates
• 25 year manufacturers performance warranty on solar panels
• 25 year product warranty on micro-inverters
• The solar kit does NOT include copper grounding wire or PV wire from the solar array to the main household electrical panel
• System Specifications:
• Maximum Power DC (Wp): 12,480 watts DC; 12.5 kW
• Maximum Power AC (Wp): 11,232 watts AC
• Estimated Power Generated: 1,750 kWh AC monthly average
• Maximum Power Voltage Vmp (V): 240V
• Maximum System Output Current Imp (A): 48A
• Array Dimensions: 850 square feet
• Array Weight: 2,300 lbs
• Solar Panel Model Specification: Conergy PE-260P
• STC Maximum Power Pmax (Wp): 260 watts DC
• PTC Maximum Power Pmax (Wp): 232.1 watts DC
• Module Efficiency: 15.90%
• Maximum Power Voltage Vmp (V): 30.77V
• Maximum Power Current Imp (A): 8.45A
• Open Circuit Voltage Voc (V): 37.73V
• Short Circuit Current Isc (A): 8.91A
• Maximum system voltage (UL): 1000V UL, 1000V IEC
• Maximum series fuse rating: 15A
• Cells per module: 60
• Cell Type: Polycrystalline silicon, 3 busbar
• Frame: Anodized Aluminum Alloy, clear
• Glass: 3.2mm tempered solar glass, self-cleaning
• Dimensions: 65 x 39.1 x 1.57 inches
• Weight: 40.7 lbs
• Junction Box: IP67, Tongling TL-Box026
• Connector Type: MC4 compatible Tongling TL cable
• Output cables: 39.4 inches, 12 AWG
• Product Warranty: 10 years material and workmanship
• Performance Guarantee: 25 years power output
• Fire Safety Classification: Class C
• Certifications: UL 1703, CEC, IEC 61215, IEC/EN 61730, IEC 61701 Salt Mist Corrosion Testing
• Operating Temperature Range: -40F to 136F
• Nominal Operating Cell Temperature NOCT: 110.1 degrees F +/- 2 degrees
• Front Load (snow) Test: 113 PSF
• Rear static load (wind) test: 5400Pa
• Hailstone impact test: 1 inch hail at 52 mph from 3 ft distance

How to Install the Conergy Solar Enphase Micro-Inverter System Kit

1. Read and follow the installation instruction manuals provided with the solar panel and micro-inverter
2. Secure the roof attachment standoffs and flashing to the roof joists; add caulk as needed
3. Attach mounting rails to the roof attachment standoffs using supplied hardware
4. Secure the micro-inverter(s) to the mounting rails using the supplied grounding lugs
5. Connect the solar panel output cables to the micro-inverter input cables
6. Secure the solar panel(s) to the mounting rails using the supplied mid-clamps and end-clamps
7. Connect the AC inverter cables along each row of modules; Connect multiple rows using the AC inverter extension cable; Connect the last micro-inverter cable to the AC transition cable
8. Connect the AC transition cable to a junction box or AC Safety Switch disconnect box (optional, varies by location)
9. Connect a PV wire from the junction box or safety switch to an open 20A circuit breaker in the household electrical box
10. Contact the local electric utility company to schedule connection to the grid