12.5kW Solar Kit Panasonic 240, SolarEdge Optimizer

• Your 12,480 watt DC Grid-Tie System from Panasonic will include:
• 52 Panasonic Solar Panels 240 watt model HIT Power 240S, VBHN240SA11
• 2 SolarEdge Inverter inverter model # SE6000A-US
• 52 SolarEdge P400 Power Optimizers
• SolarEdge Home Gateway Monitoring Kit
• Integrated safety switch disconnect box
• Rooftop rack system, 7 row X 8 column layout, portrait orientation, flush mount setup
• Mounting rails and splices
• Module mid-clamps and end-clamps
• L-feet attachments and hardware
• QuickMount PV water-tight aluminum flashing with hardware
• WEEB grounding lugs and clips
• NEC code compliant PV labels
• Documentation includes product data sheets, warranty certificates, installation instructions with wiring diagrams, and owner manuals
• 20 year manufacturers performance warranty on solar panels
• 12 year warranty on inverter, optional extended warranty up to 25 years
• 25 year manufacturers performance warranty on power optimizers
• The solar kits does NOT include copper grounding wire or PV wire from the solar array to the main household electrical panel
• PV Array System Specifications:
• Maximum Power DC (Wp): 12,480 watts DC; 12.5 kW
• Maximum Power AC (Wp): 10,608 watts AC
• Estimated Power Generated: 1,589 kWh AC monthly average
• Maximum Power Voltage Vmp (V): 240V
• Open Circuit Voltage Voc (V) Range: 211 - 264V
• System Output Current Imp (A): 50A
• Array Dimensions: 750 square feet
• Array Weight: 1,900 lbs
• Solar Module Specifications: Panasonic HIT Power 240S or VBHN240SA06
• Rated Power (Pmax): 240 watts
• CEC PTC Rating 223.5 Watts
• Maximum Power Voltage (Vpm) 43.7 V
• Maximum Power Current (Ipm) 5.51 A
• Open Circuit Voltage (Voc) 52.4 V
• Short Circuit Current (Isc) 5.85 A
• Cell Efficiency: 21.6%
• Module Efficiency: 19%
• Watts per Sq Ft: 17.70 W
• Maximum System Voltage 600 V
• Series Fuse Rating 15 A
• Warranted Tolerance (-/+): 0 +10%
• Dimensions 62.2in x 31.4 x 1.4 inches
• Module Area 13.56 sq ft
• Panel Weight: 33.1 lbs
• Cable Length 40.55 in male, 34.64 in female
• Cable Size: #12 AWG PV Cable
• Connector TypeL MC4
• Static Wind: 50 PSF
• Snow Load: 2,400 Pa
• Safety Rating Class C
• Certifications UL 1703, CEC California Energy Commission
• Warranty: 10 Years Workmanship, 20 Years Power Output

DIY or Full-Service Pro Solar Installation

You can choose how to install the solar panel system. You can Do-It-Yourself (DIY), hire any contractor or handyman for labor, or we can provide Full-Service Professional installation. Most customers choose DIY to save some serious money. However you decide to go solar, we will provide the permit plans, instruction manuals and lifetime technical support. You will also have the same manufacturer warranties, and be eligible for tax credits, rebates and other incentives.

Full-Service, Professional solar panel system installation by a state licensed contractor includes labor, wiring, electrical setup, balance of system parts, building permit, utility approval, inspection, monitoring setup, and activation. 5 to 10 year warranty on labor. Installation services are not subject to state sales tax. Final price subject to system design and site visit. Additional fees may apply for electrical panel upgrade, multiple roof areas, conduit wiring greater than 100 ft, two or more story property, or tilt mounting.

How to Install the PV Electric System with SolarEdge Optimizers

1. Read and follow the installation instruction manuals provided with the solar panel, the inverter and the mounting
2. Secure the roof attachment standoffs and flashing to the roof rafter joists; add caulk as needed
3. Attach mounting rails to the roof attachment standoffs using supplied hardware
4. Attach the module optimizers to the rails using the supplied hardware and connect the optimizer output cables into desired strings as indicated in the electrical line drawing
5. Connect PV wires and ground cable from the rooftop junction box or safety switch to the solar inverter
6. Connect the inverter to an open circuit breaker in the household electrical box. Place the circuit breaker in the OFF position. The breaker size should conform to NEC standards.
7. Secure the solar panels to the mounting rails using the supplied mid-clamps and end-clamps
8. Connect the solar panel output cables to the module optimizers
9. Connect the last PV cable to a junction box or Safety Switch disconnect box
10. Contact the local building department or electric utility company to schedule inspection prior to connection to the grid

Tools Required to Install Rooftop Solar Mounting

• Tape measure
• Roofers bar, shingle ripper
• Chalk line
• Stud finder
• Caulking gun
• Sealant compatible with roofing materials
• Drill with 7/32" long-style bit
• Drill or impact gun with 1/2" deep socket
• Ladder, safety harness and rope

How to Install Solar Panel QuickMount Roof Flashing Attachments

Simply slide the flashing under a row of roof shingles, drill pilot hole, apply sealant to hole, secure with bolt and attach sealing washer. Just a few minutes to install QuickMount PV. Watch this video for a demonstration.

Installation Video Guide for Rooftop Solar Mounting

How to Install SolarEdge Optimizers

This 5 minute video demonstrates how to install a solar edge inverter and optimizer system step-by-step.