15kW Solar Kit Canadian 265M Black, SolarEdge inverter-Optimizer, Rooftop

• Your Grid-Tie PV Solar System from Canadian will include:
• (57) Canadian Solar Panels 265 watt CS6P-265M
• (2) SolarEdge inverter model # SE7600A-US
• (57) SolarEdge Power Optimizers # P300
• SolarEdge Home Gateway lifetime monitoring communication kit
• Integrated safety switch disconnect box
• Rooftop rack system, 5 row X 12 column layout, portrait orientation, flush mount setup
• Mounting rails and splices
• Module grounding mid-clamps and end-clamps, black finish
• L-feet attachments with hardware
• QuickMount PV water-tight aluminum flashing or Schletter tile roof hooks
• WEEB grounding lugs and clips
• NEC code compliant PV wiring labels
• PV system permit plans, product data sheets, warranty certificates and installation instruction manuals
• 25 year manufacturers performance warranty on solar panels
• 12 year product warranty on inverter
• 25 year product warranty on optimizers
• PV Array System Specifications:
• Maximum Power DC (Wp): 15,105 watts DC; 15.1 kW
• Maximum Power AC (Wp): 12,990 watts AC
• Estimated Power Generated: 1,900 kWh AC monthly average
• Maximum Power Voltage Vmp (V): 240V
• Maximum System Output Current Imp (A): 64A
• Array Dimensions: 1,000 square feet
• Array Weight: 2,700 lbs
• Solar Panel Specifications:
• Solar Panel Model: Canadian Solar CS6P-265M
• STC Maximum Power Pmax (Wp): 255 watts DC
• PTC Maximum Power Pmax (Wp): 242.1 watts DC
• NOCT Nominal Power: 191 watts DC
• Module Efficiency: 16.47%
• Maximum Power Voltage Vmp (V): 30.9V
• Maximum Power Current Imp (A): 8.61A
• Open Circuit Voltage Voc (V): 37.9V
• Short Circuit Current Isc (A): 9.11A
• Maximum system voltage: 1000V UL, 1000V IEC
• Maximum series fuse rating: 15A
• Power Tolerance 0 + 5W
• Solar Cells per module: 60
• Solar Cell Type: Mono-crystalline silicon
• Frame: Anodized Aluminum Alloy, black frame
• Glass: High transparent tempered solar glass, self-cleaning
• Dimensions: 64.5 x 38.7 x 1.57 inches
• Weight: 39.7 lbs
• Junction Box: IP67 Class, 4 diode Quartech
• Connector Type: MC4 or compatible
• Output cables: 39.4 inches, 12 AWG
• Product Warranty: 10 years material and workmanship
• Performance Guarantee: 25 years power output
• Fire Safety Classification: Class C
• Certifications: UL 1703, California CEC, IEC 61215, IEC/EN 61730, IEC 61701 Salt Mist Corrosion Testing, IEC 62716
• Operating Temperature Range: -40F to +185F
• Nominal Operating Cell Temperature NOCT: 113 degrees F +/- 2 degrees
• Front Load (snow) Test: 113 PSF
• Rear static load (wind) test: 5400Pa
• Hailstone impact test: 1 inch hail at 23M/s from 1m distance

DIY or Full-Service Pro Solar Installation

You can choose how to install the solar panel system. You can Do-It-Yourself (DIY), hire any contractor or handyman for labor, or we can provide Full-Service Professional installation. Most customers choose DIY to save some serious money. However you decide to go solar, we will provide the permit plans, instruction manuals and lifetime technical support. You will also have the same manufacturer warranties, and be eligible for tax credits, rebates and other incentives.

Full-Service, Professional solar panel system installation by a state licensed contractor includes labor, wiring, electrical setup, balance of system parts, building permit, utility approval, inspection, monitoring setup, and activation. 5 to 10 year warranty on labor. Installation services are not subject to state sales tax. Final price subject to system design and site visit. Additional fees may apply for electrical panel upgrade, multiple roof areas, conduit wiring greater than 100 ft, two or more story property, or tilt mounting.

How to Install the PV Electric System with SolarEdge Optimizers

1. Read and follow the installation instruction manuals provided with the solar panel, the inverter and the mounting
2. Secure the roof attachment standoffs and flashing to the roof rafter joists; add caulk as needed
3. Attach mounting rails to the roof attachment standoffs using supplied hardware
4. Attach the module optimizers to the rails using the supplied hardware and connect the optimizer output cables into desired strings as indicated in the electrical line drawing
5. Connect PV wires and ground cable from the rooftop junction box or safety switch to the solar inverter
6. Connect the inverter to an open circuit breaker in the household electrical box. Place the circuit breaker in the OFF position. The breaker size should conform to NEC standards.
7. Secure the solar panels to the mounting rails using the supplied mid-clamps and end-clamps
8. Connect the solar panel output cables to the module optimizers
9. Connect the last PV cable to a junction box or Safety Switch disconnect box
10. Contact the local building department or electric utility company to schedule inspection prior to connection to the grid

Tools Required to Install Rooftop Solar Mounting

• Tape measure
• Roofers bar, shingle ripper
• Chalk line
• Stud finder
• Caulking gun
• Sealant compatible with roofing materials
• Drill with 7/32" long-style bit
• Drill or impact gun with 1/2" deep socket
• Ladder, safety harness and rope

How to Install Solar Panel QuickMount Roof Flashing Attachments

Simply slide the flashing under a row of roof shingles, drill pilot hole, apply sealant to hole, secure with bolt and attach sealing washer. Just a few minutes to install QuickMount PV. Watch this video for a demonstration.

Installation Video Guide for Rooftop Solar Mounting

How to Install SolarEdge Optimizers

This 5 minute video demonstrates how to install a solar edge inverter and optimizer system step-by-step.