4kW Solar Kit Canadian 260P Fronius inverter

• Your Grid-Tie System from Canadian will include:
• (16) Canadian Solar Panels 260 watt model # CS6P-260P-BL with black frame
• (1) Fronius Primo 3.8 inverter 3800 watts with lifetime WiFi monitoring
• (2) x 50' PV wires with MC4 connectors
• Rooftop rack system, 2 row X 8 column layout, portrait orientation, flush setup
• Mounting rails and splices
• Module grounding mid-clamps and end-clamps
• L-feet attachments with hardware
• QuickMount PV water-tight aluminum flashing or Schletter Tile Roof Hook mounts
• WEEB grounding lugs
• Inverter integrated safety switch disconnect box
• NEC code compliant PV labels
• Product specifications, warranty certificates, installation instructions and owner manuals
• 25 year manufacturers performance warranty on solar panels
• 10 year manufacturers warranty on inverters; optional 20 year extended warranty available
• PV SOLAR SYSTEM SPECIFICATION
• Maximum Power DC (Wp): 4,160 watts DC; 4.1 kW
• Maximum Power AC (Wp): 3,578 watts AC
• Estimated Power Generated: 509 kWh AC monthly average
• Maximum Power Voltage Vmp (V): 240V
• System Output Current Imp (A): 15.8A
• Array Dimensions: 300 square feet
• Array Weight: 750 lbs
• Specifications for Canadian Solar CS6P-260P-BL
• STC Maximum Power Pmax (Wp): 260 watts DC
• PTC Maximum Power Pmax (Wp): 239.1 watts DC
• Module Efficiency: 16.16%
• Maximum Power Voltage Vmp (V): 30.4V
• Maximum Power Current Imp (A): 8.56A
• Open Circuit Voltage Voc (V): 37.5V
• Short Circuit Current Isc (A): 9.12A
• Maximum system voltage: 600V UL, 1000V IEC
• Maximum series fuse rating: 15A
• Power Tolerance 0 + 5W
• Cells per module: 60
• Cell Type: Poly-crystalline silicon
• Frame: Anodized Aluminum Alloy, black
• Glass: High transparent tempered solar glass, self-cleaning
• Dimensions: 64.5 x 38.7 x 1.57 inches
• Weight: 41.9 lbs
• Junction Box: IP65 Class, 3 diodes
• Connector Type: MC4 or compatible
• Output cables: 39.4 inches, 12 AWG
• Product Warranty: 10 years material and workmanship
• Performance Guarantee: 25 years power output
• Fire Safety Classification: Class C
• Certifications: UL 1703, California CEC, IEC 61215, IEC/EN 61730, IEC 61701 Salt Mist Corrosion Testing
• Operating Temperature Range: -40F to 185F
• Nominal Operating Cell Temperature NOCT: 113 degrees F +/- 2 degrees
• Front Load (snow) Test: 113 PSF
• Rear static load (wind) test: 5400Pa
• Hailstone impact test: 1 inch hail at 23M/s from 1m distance

How to Install the Solar Panel Kit with String Inverter

1. Read and follow the installation instruction manuals provided with the solar panels, inverter and mounting system
2. Secure the roof attachment standoffs and flashing to the roof joists; add caulk as needed
3. Attach mounting rails to the roof attachment standoffs using supplied hardware
4. Secure the solar panel(s) to the mounting rails using the supplied mid-clamps and end-clamps
5. Connect the solar panel cables
6. Connect the last PV cable to a junction box or DC Safety Switch disconnect box (optional, varies by location)
7. Connect PV wires from the junction box or safety switch to the inverter
8. Connect the inverter to an new circuit breaker in the household electrical box
9. Contact the local building department or electric utility company to schedule inspection and connection to the grid for permission to operate

Tools Required to Install Rooftop Solar Mounting

• Tape measure
• Roofers bar, shingle ripper
• Chalk line
• Stud finder
• Caulking gun
• Sealant compatible with roofing materials
• Drill with 7/32" long-style bit
• Drill or impact gun with 1/2" deep socket
• Ladder, Safety harness and rope

How to Install QuickMount PV Solar Panel Flashing Attachment

Simply slide the flashing under a row of roof shingles, drill pilot hole, apply sealant to hole, secure with bolt and attach sealing washer. Just a few minutes to install QuickMount PV. Watch this video for a demonstration.

Video Installation Guide for Rooftop Solar Mounting

Video Installation Guide for Fronius Inverter