4kW Solar Kit LG300 SolarEdge

• Your Grid-Tie Solar Energy System from LG will include:
• (14) LG Solar Panels 300 watt model LG300N1K-G4
• (14) SolarEdge Power Optimizers P300 for 60-cell modules
• (1) SolarEdge inverter model SE7600A-US
• SolarEdge Home Gateway lifetime monitoring communication kit
• Integrated safety switch disconnect box
• (1) x 50' PV wires with MC4 connectors
• Rooftop rack system, 1 row X 14 column layout, flush setup
• Mounting rails, splices, grounding lugs
• Module grounding mid-clamps and end-clamps, black finish
• QuickMount PV water-tight aluminum flashing or Schletter tile roof hooks
• NEC code compliant PV placard and wiring labels
• PV system permit plans, product data sheets, warranty certificates and installation instruction manuals
• 12 year product, 25 year performance warranty on solar panels
• 25 year product warranty on DC module optimizers
• 12 year product warranty on inverter; optional extended warranty up to 25 years
• Lifetime technical support
• PV SYSTEM ARRAY SPECIFICATIONS
• Maximum Power DC (Wp): 4,200 watts DC; 4.2 kW
• Maximum Power AC (Wp): 3,821 watts AC
• Estimated Power Generated: 510 kWh AC monthly average
• Maximum Power Voltage Vmp (V): 240V
• Maximum System Output Current Imp (A): 32A
• Minimum Required OCPD Circuit Breaker Rating (A): 40 Amps
• Array Dimensions: 253 square feet
• Array Weight: 644 lbs
• Distributed Load: 2.6 lbs psf
• Structural Design Criteria: ASCE 7-10
• Design Wind Speed Rating: 110 mph
• Design Snow Load: 20 lbs psf
• SOLAR PANEL SPECIFICATIONS
• Manufacturer: LG Solar
• Model: LG300N1K-G4 Mono X NeON
• STC DC Watts Maximum Power Pmax: 300 W
• PTC DC Watts Maximum Power Pmax: 279.9 W
• NOCT DC Watts Maximum Power Pmax: 218 W
• Module Efficiency: 18.3%
• Max Power Voltage (Vmp): 32.5 Volts
• Max Power Current (Impp): 9.26 Amps
• Open Circuit Voltage (Voc): 39.7 Volts
• Short Circuit Current (Isc): 9.70 Amps
• Maximum System Voltage: 1000 V UL/IEC
• Series Fuse Rating: 20 Amps
• Cell Technology Type: Monocrystalline, N-type
• # Solar Cells: 60
• Frame: Anodized Aluminum Alloy, Black
• Connector type: MC4 IP67
• Dimensions: 64.56 x 39.37 x 1.57 inches
• Weight: 37.476 lbs
• Snow load: 6000 Pa / 125 psf
• Wind Load: 5400 Pa / 112 psf
• Operating temperature: -40F to +195F
• Product Warranty: 12 years material and workmanship
• Performance Guarantee: 25 years linear power output; 1st year: 98%, after 2nd year: 0.6%p annual degradation, total 83.6% for 25 years
• Fire Safety Classification: Class C
• Certifications: California CEC, IEC 61215, IEC 61730, IEC 62716 (Ammonia Test), IEC 61701(Salt Mist Corrosion Test)

DIY or Full-Service Pro Solar Installation

You can choose how to install the solar panel system. You can Do-It-Yourself (DIY), hire any contractor or handyman for labor, or we can provide Full-Service Professional installation. Most customers choose DIY to save some serious money. However you decide to go solar, we will provide the permit plans, instruction manuals and lifetime technical support. You will also have the same manufacturer warranties, and be eligible for tax credits, rebates and other incentives.

Full-Service, Professional solar panel system installation by a state licensed contractor includes labor, wiring, electrical setup, balance of system parts, building permit, utility approval, inspection, monitoring setup, and activation. 5 to 10 year warranty on labor. Installation services are not subject to state sales tax. Final price subject to system design and site visit. Additional fees may apply for electrical panel upgrade, multiple roof areas, conduit wiring greater than 100 ft, two or more story property, or tilt mounting.

How to Install the PV Electric System with SolarEdge Optimizers

1. Read and follow the installation instruction manuals provided with the solar panel, the inverter and the mounting
2. Secure the roof attachment standoffs and flashing to the roof rafter joists; add caulk as needed
3. Attach mounting rails to the roof attachment standoffs using supplied hardware
4. Attach the module optimizers to the rails using the supplied hardware and connect the optimizer output cables into desired strings as indicated in the electrical line drawing
5. Connect PV wires and ground cable from the rooftop junction box or safety switch to the solar inverter
6. Connect the inverter to an open circuit breaker in the household electrical box. Place the circuit breaker in the OFF position. The breaker size should conform to NEC standards.
7. Secure the solar panels to the mounting rails using the supplied mid-clamps and end-clamps
8. Connect the solar panel output cables to the module optimizers
9. Connect the last PV cable to a junction box or Safety Switch disconnect box
10. Contact the local building department or electric utility company to schedule inspection prior to connection to the grid

Tools Required to Install Rooftop Solar Mounting

• Tape measure
• Roofers bar, shingle ripper
• Chalk line
• Stud finder
• Caulking gun
• Sealant compatible with roofing materials
• Drill with 7/32" long-style bit
• Drill or impact gun with 1/2" deep socket
• Ladder, safety harness and rope

How to Install Solar Panel QuickMount Roof Flashing Attachments

Simply slide the flashing under a row of roof shingles, drill pilot hole, apply sealant to hole, secure with bolt and attach sealing washer. Just a few minutes to install QuickMount PV. Watch this video for a demonstration.

Installation Video Guide for Rooftop Solar Mounting

How to Install SolarEdge Optimizers

This 5 minute video demonstrates how to install a solar edge inverter and optimizer system step-by-step.