8.1kW PV Kit Silevo 300, Power-One Inverter, Rooftop Mount

• Your Grid-Tied PV Power System from will include:
• 27 Silevo 300 watt solar panel model # Triex-U300
• 1 Power-One inverter model # UNO-7.6-TL
• Rooftop rack system, 3 row X 9 column layout, portrait orientation, flush setup
• Mounting rails and splices
• Module mid-clamps and end-clamps
• L-feet attachments with hardware
• QuickMount PV water-tight aluminum flashing with hardware
• WEEB grounding lugs and clips
• Cable management clips
• Inverter integrated Square-D safety switch disconnect box
• NEC code compliant PV labels
• PV system design specifications, product data sheets, warranty certificates, installation instructions with wiring diagrams, and owner manuals
• 25 year manufacturers performance warranty on solar panels
• 10 year manufacturers warranty on inverters; optional 20 year extended warranty available
• The solar kits does NOT include copper grounding wire or PV wire from the solar array to the main household electrical panel
• PV System Array Specifications:
• Maximum Power DC (Wp): 8,100 watts DC; 8.1 kW
• Maximum Power AC (Wp): 6,885 watts AC
• Estimated Power Generated: 975 kWh AC monthly average
• Rated AC Power Voltage Vmp (V): 240V
• Maximum Inverter Output Current Imp (A): 32 Amps
• Array Dimensions: 475 square feet
• Array Weight: 1,300 lbs
• Specifications for Silevo model # Triex-U300
• STC DC Watts Maximum Power Pmax: 300 W
• PTC DC Watts Maximum Power Pmax: 280.5 W
• Module Efficiency: 17.9%
• Maximum Power Voltage Vmp (V): 57.0V
• Maximum Power Current Imp (A): 5.27A
• Open Circuit Voltage Voc (V): 69.5V
• Short Circuit Current Isc (A): 5.65A
• Maximum system voltage: 1000Vdc IEC, 600Vdc UL
• Maximum series fuse rating: 12A
• Solar Cells per module: 96
• Solar Cell Type: Hybrid Monocrystalline Amorphous silicon a-Si
• Dimensions: 61.73 x 41.65 x 1.57 inches
• Weight: 41.88 lbs
• Frame: Anodized Aluminum Alloy
• Glass: High transparent, low-iron tempered solar glass
• Connector Type: MC4 compatible
• Output cables: 12 AWG, 39.37 inches
• Product Warranty: 10 years material and workmanship
• Performance Guarantee: 25 years linear power output guarantee
• Fire Safety Classification: Class C
• Certifications: UL 1703, CEC, IEC 61215, IEC/EN 61730
• Operating Temperature Range: -40F to +185F
• Mechanical Load Capability up to 5400 Pa
• Front Load (snow) Test: 5400 Pa (112.8 PSF)
• Rear static load (wind) test: 2400Pa
• Hailstone impact test: 1 inch hail at 43 MPH from 1m distance

Steps to Install the Mitsubishi Electric Solar Kit

1. Read and follow the installation instruction manuals provided with the solar panels, inverter and mounting system
2. Secure the roof attachment standoffs and flashing to the roof joists; add caulk as needed
3. Attach mounting rails to the roof attachment standoffs using supplied hardware
4. Secure the solar panel(s) to the mounting rails using the supplied mid-clamps and end-clamps
5. Connect the solar panel cables
6. Connect the last PV cable to a junction box or DC Safety Switch disconnect box (optional, varies by location)
7. Connect a PV wire from the junction box or safety switch to the inverter
8. Connect the inverter to an open 20A circuit breaker in the household electrical box
9. Contact the local electric utility company to schedule connection to the grid