7.7kW Solar Kit Hanwha panels, Enphase micro, Mounting

• Your pre-engineered 7,680 watt DC Grid-Tie System from Hanwha will include:
• 32 Hanwha Solar Panels 240 watt model # HSL60P-PA-0-240T
• 32 Enphase micro-inverters 215 watt AC model # M215-60-2LL-S22
• 1 Enphase Enlighten Envoy lifetime performance monitoring system
• PV cables for module connection, extension and transition
• Cable management clips
• Termination cap(s)
• Rooftop rack system, 4 row X 8 column layout, portrait orientation, flush mount setup
• Mounting rails
• Module mid-clamps and end-clamps
• L-feet attachments with hardware
• QuickMount PV water-tight aluminum flashing with hardware
• WEEB grounding lugs and clips
• Integrated safety switch disconnect box
• Documentation includes product data sheets, warranty certificates, installation instructions with wiring diagrams, and owner manuals
• 25 year manufacturers performance warranty on solar panels and inverters
• The solar kits does NOT include copper grounding wire or PV wire from the solar array to the main household electrical panel
• System Specifications:
• Maximum Power DC (Wp): 7,680 watts DC; 6.7 kW
• Maximum Power AC (Wp): 6,375 watts AC
• Estimated Power Generated: 12,185 kWh per year; 1,015 kWh monthly average
• Maximum Power Voltage Vmp (V): 240V
• Open Circuit Voltage Voc (V) Range: 211 - 264V
• Maximum System Output Current Imp (A): 30.08A
• Output Current per module Imp (A): 0.94A
• Array Dimensions: 500 square feet
• Array Weight: 1,600 lbs
• Solar Panel Specifications: Hanwha Solar Module HSL60P-PA-0-240T
• Maximum Power Pmax (Wp) STC: 240 watts DC
• Maximum Power Pmax (Wp) NOCT: 215.9 watts DC
• Module Efficiency: 14.42%
• Maximum Power Voltage Vmp (V): 30.0V
• Maximum Power Current Imp (A): 8.02A
• Open Circuit Voltage Voc (V): 37.3V
• Short Circuit Current Isc (A): 8.58A
• Maximum system voltage (UL): 600V
• Maximum series fuse rating: 15A
• Cells per module: 60
• Cell Type: Polycrystalline silicon
• Frame: Anodized Aluminum Alloy
• Glass: Low iron tempered glass
• Dimensions: 65 x 39.37 x 1.77 inches
• Weight: 44 lbs
• Connector Type: MC4 compatible
• Output cables: 35.43 inches
• Product Warranty: 10 year material and workmanship
• Performance Warranty: 25 year power output
• Fire Safety Classification: Class C
• Certifications: UL, CEC, FSEC
• Operating Temperature Range: -40F to 136F
• Nominal Operating Cell Temperature NOCT: 113 degrees F +/- 2 degrees
• Front Load (snow) Test: 5400Pa
• Rear static load (wind) test: 2400Pa
• Hailstone impact test: 1 inch hail at 23M/s from 1m distance

How to Install the Hanwha Enphase AC Solar Panel System

1. Read and follow the installation instruction manuals provided with the solar panel and micro-inverter
2. Secure the roof attachment standoffs and flashing to the roof joists; add caulk as needed
3. Attach mounting rails to the roof attachment standoffs using supplied hardware
4. Secure the micro-inverter(s) to the mounting rails using the supplied grounding lugs
5. Connect the solar panel output cables to the micro-inverter input cables
6. Secure the solar panel(s) to the mounting rails using the supplied mid-clamps and end-clamps
7. Connect the AC inverter cables along each row of modules; Connect multiple rows using the AC inverter extension cable; Connect the last micro-inverter cable to the AC transition cable
8. Connect the AC transition cable to a junction box or AC Safety Switch disconnect box (optional, varies by location)
9. Connect a PV wire from the junction box or safety switch to an open 20A circuit breaker in the household electrical box
10. Contact the local electric utility company to schedule connection to the grid