80A 150V Battery Charge Controller OutBack Power FM80-150

OutBack Power FM80-150 MPPT Charge Controller 80A. The FLEXmax FM60/FM80 are the latest innovation in Maximum Power Point Tracking (MPPT) charge controllers from OutBack Power Systems. The FLEXmax MPPT software algorithm is both continuous and active, increasing your photovoltaic array power yield up to 30% compared to non-MPPT controllers. With new enhanced cooling management, FM60/FM80 charge controllers can operate at their maximum current rating, 60 amps or 80 amps respectively, in ambient temperatures as high as 104F (40C). FLEXmax controllers will de-rate power capacity automatically above 40C to 60C maximum and are designed to charge nominal battery voltages of 12, 24, 36, 48 or 60 Vdc with fully adjustable set points for battery type. They can also charge a lower voltage battery from a higher voltage PV array with maximum PV open circuit voltage of 150 Vdc (Voc) in the coldest conditions. FLEXmax controllers can be configured for positive ground PV systems. A built-in backlit 80 character digital meter displays the current system status and data-logging performance for the last 128 days. Integrated network communications allows FM60/FM80 controllers to be remotely programmed and monitored via a MATE system display. Indoor type 1 enclosure includes a 1 inch knockout in rear, left side and two at bottom. UL-1741 listed USA/CAN. Standard 5-year warranty with a 5-year extension available. Order online or PHONE 888-498-3331