1kW Solar Kit BenQ 255W, Micro-inverters, Unirac

Designed for home solar, this grid-tied PV energy system produces 1,020 watts (1 kW) with four 255 watt, all-black BenQ solar panels PM250PA0-255, factory-installed SolarBridge micro-inverters, Unirac SolarMount and safety switch disconnect box. Factory-installed micro-inverters deliver up to 25% more AC ready power. This BenQ home power system has every component needed to get the job done easily - and save a bundle. The kit includes BenQ solar panels with 25 year warranty, grid-ready AC micro-Inverters, rooftop mounting system, wiring, hardware, step-by-step instructions and permit-ready documentation. Save money and be energy independent with this easy to install home energy system Order online or PHONE 888-498-3331

---

WANT A SOLAR PANEL SYSTEM AT THE LOWEST COST? START SOLAR DESIGN

---

• Your 1,020 watt DC Grid-Tie System from BenQ will include:
• 4 BenQ Solar Panels 255 watt model # PM250PA0-255
• 4 factory-installed SolarBridge micro-inverters model # P235LV-240
• Cables for inverter connection, extension and transition
• Cable management clips
• Termination cap(s)
• Unirac rooftop rack system, 1 row X 4 column layout, portrait orientation, flush mount setup
• Unirac SolarMount rails
• L-feet attachments with hardware
• Module mid-clamps and end-clamps
• QuickMount PV water-tight aluminum flashing with hardware
• Grounding WEEB lugs and clips
• Square-D AC safety switch disconnect box
• NEC code compliant PV labels
• Documentation includes product data sheets, warranty certificates, installation instructions with wiring diagrams, and owner manuals
• 25 year manufacturers performance warranty on solar panels and micro-inverters
• The solar kits does NOT include copper grounding wire or PV wire from the solar array to the main household electrical panel
• PV Array System Specifications:
• Maximum Power DC (Wp): 1,000 watts DC; 1 kW
• Maximum Power AC (Wp): 857 watts AC
• Estimated Power Generated: 137 kWh AC monthly average
• Maximum Power Voltage Vmp (V): 240V
• Open Circuit Voltage Voc (V) Range: 211 - 264V
• System Output Current Imp (A): 3.76A
• Output Current Imp per module (A): 0.94A
• Array Dimensions: 75 square feet
• Array Weight: 200 lbs
• Solar Module Specifications: BenQ PM250MA0-255
• Maximum Power STC Pmax (Wp): 255 watts DC
• Integrated Micro-Inverter: SolarBridge P235LV-240
• Maximum Power AC (Wp): 225 watts AC
• Maximum Power Voltage Vmp (V): 240V
• Output Current Imp (A): 0.94A
• Open Circuit Voltage Voc (V) Range: 211 - 264V
• Maximum system voltage (UL): 600V UL, 1000V IEC
• Maximum series fuse rating: 15A
• Technology: 60 mono-crystalline solar cells
• Dimensions: 65.09 x 39.06 x 1.57 inches
• Weight: 48.5 lbs
• Glass: High transparent, tempered solar glass
• Frame: Anodized aluminum frame, All Black
• Module Wiring: Fully-guarded, locking AC connector
• Ground Wiring: UL approved, internal equipment ground for module and inverter
• Operating Temperature: -40F to +185F
• Surface Load: Tested up to 5400 Pa wind and snow load
• Certifications: UL 1703, IEC 61216, IEC 61730, California CEC listed

BenQ Solar AC Unison is a new breakthrough in photovoltaic (PV) technology. BenQ Solar combines its premium PV module with reliable micro-inverter technology from SolarBridge to maximize lifetime energy production and cost-savings.

The integrated microinverter converts module DC to grid compliant AC power at each solar panel. This increases system performance by up to 25%, reduces shading losses, and makes PV safer and easier to install. BenQ Solar Unison AC modules can be installed, monitored and maintained with ease.

All BenQ Solar PV products are manufactured under strict quality control standards. BenQ Solar AC Unison is designed for 25 years or more of efficient renewable power generation.

BenQ Solar AC Unison Comparison Review Video

BenQ Solar AC Unison Installation Video