SunPumps SDS series pumps can be installed below the water level in a pond, river or cistern, or installed by hand into a ground water well. They can be used to fill an open tank or in a pressurized water delivery system, are easy to install, require very little maintenance and are repairable.
SunPumps SDS series pumps are designed for use in stand-alone water delivery systems. Pollution-free, corrosion-resistant, self-lubricating and quiet, an ideal solution to provide water for remote homes, campsites, livestock, small farms or for many other needs beyond the commercial power grid.
D-Series Duplex Pumps are suitable for installation in 4” (100mm) inside diameter & larger wells. Flow rates up to 2 GPM, and heads up to 230 feet. Q-Series Quad pumps are for installation in 5” (127mm) inside diameter & larger wells. Flow rates up to 5 GPM, and heads up to 100 feet.
SunPumps PCA and PCB series pump controllers are high quality, micro processor-controlled DC-power converters designed as the interface between a DC powered pump and the power source. The DC source may be solar modules, batteries or systems using wind generators. 1-year warranty.
The primary function of the PC series controller is to boost the current of solar modules in low sunlight conditions while holding the voltage of the solar modules at the maximum power point. This allows a pump to start earlier in the morning and stay running longer in the evening.
SunPumps PC series pump controllers have many unique features designed specifically for water pumping. All PC series controllers include a pump speed control circuit, a remote switch circuit, a sensor-less low water cut-off circuit, an electronic circuit breaker and indicator lights. The PCB series controllers have specific models for brushless DC as well as brush-type DC motors.