24V 400W HAWT Wind Turbine with Battery Charge Controller. The Tycon TPW Series Wind Turbines are lightweight at less than 10.5kg and are designed for ease of installation and long service life. The generator is a very low cogging force design for better performance in light winds and is packaged in a fully sealed die cast anodized aluminum enclosure. There are no brushes to wear out or cause electrical noise and the bearings are sealed so the system is maintenance free. The blades are glass reinforced nylon for high strength, UV resistance and fatigue resistance. The turbines are available in 12V and 24V versions. The blade diameter of the 200W is 0.920 meter while the 400W is 1.12 meter. The 6 blade design offers better performance in light winds and reduced vibration when spinning at speed. The TPW series wind turbines have automatic overspeed protection to prevent damage in high winds. The permanent magnets used are Neodymium Iron Boron (NdFeB) for higher power output. Mounting is to the top of a 41mm (1.6 inch) ID standard pole. The hardware used is stainless steel for corrosion protection. Now includes a battery charging controller to prevent battery over-charge and over-discharge. Controller can be used in conjunction with a solar controller to create a hybrid power system. Order online or PHONE 888-498-3331
Copyright © FreeCleanSolar.com, Inc. All Rights Reserved. 1-800-498-3331 Built with Volusion